Menu
Original price was: $1,791.90.$1,734.15Current price is: $1,734.15.
Mobilmet 420 Series products are high-performance multi-purpose cutting oils. They are chlorine-free, non-staining and non-corrosive. They are designed for light to moderate duty cutting operations and they are also suitable as machine tool lubricants and for use in light duty hydraulic
systems. They are formulated from high quality base oils and select additives to provide effective machining performance in a wide variety of
operations of both ferrous and non-ferrous metals. The oils are light-colored and transparent so that the work area can be clearly seen at all
times. The Mobilmet 420s are formulated to prevent the formation of oil mist in the vicinity of the machine tool.
Mobilmet 420 Series fluids are resistant to foaming, even with excess splashing so that superior performance is provided in the machine tool
lubrication system. With relatively low pour points and high viscosity indexes, they are not difficult to dispense in cold conditions and provide
adequate film strength in hot-running machine tool bearings under load.
In addition to their machining performance characteristics, the Mobilmet 420 Series fluids are multi-purpose in nature which helps reduce the
problems associated with cross-contamination, thus improving production and reducing rejects. They are formulated using chlorine-free
additives reducing the environmental impact of disposal and spillage. The Mobilmet 420 Series fluids control built-up edge and protect the tool
tip from wear. They provide improved surface finish that may eliminate the need for finish turning or forming before grinding.
Mobilmet 426 and Mobilmet 427 are recommended for critical machining of non-ferrous metals and automatic operations on materials
having a Brinell hardness up to about 300.